25.05. 2012 06:19
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Best Picture poll still open for votes
Home
Help
Search
Login
Register
The BSA A7 & A10 Forum
>
Technical
>
A7 & A10 Engine
>
routing for the oil pipe from the oil tank to the valve covers?
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: routing for the oil pipe from the oil tank to the valve covers? (Read 311 times)
0 Members and 2 Guests are viewing this topic.
Guy Wilson
Active
Karma: 0
Posts: 45
routing for the oil pipe from the oil tank to the valve covers?
«
on:
23.10. 2011 20:23 »
Can anyone assist me with a plumbing diagram or photo of the routing for the oil pipe from the oil tank to the valve covers? I have a 1955 swinging arm A10. The pipe I'm trying to refit has been bent right out of shape and offers no clues....
MAny thanks
Guy
Logged
iansoady
A-Clairvoyant
Karma: 7
Posts: 361
Re: routing for the oil pipe from the oil tank to the valve covers?
«
Reply #1 on:
24.10. 2011 11:50 »
They seem to vary a lot but I've run mine up the RH frame tube till it disappears under the tank then tucked under the top tube. I had to cut about 3" off the end to get it nice and snug.
A lot of bikes have them flapping about in the breeze. I don't think there's a "proper" route.
Logged
Ian.
1962 Golden Flash (arrived)
1955 Velo Viper/Venom (departed)
2004 Triumph Tiger 955i (staying)
Goldy
Warwickshire, England
A-Clairvoyant
Karma: 4
Posts: 456
Re: routing for the oil pipe from the oil tank to the valve covers?
«
Reply #2 on:
24.10. 2011 18:38 »
Guy. If you do a search on this forum for oil feed pipes started by Shaun on 6.12.2009 you will find some pictures. Regards Goldy
Logged
56 A10 Golden Flash - Restore, ride, relive.
56 C12 BSA project ongoing
Guy Wilson
Active
Karma: 0
Posts: 45
Re: routing for the oil pipe from the oil tank to the valve covers?
«
Reply #3 on:
24.10. 2011 19:26 »
thank you Goldy!
That's exactly what I need,
Guy
Logged
bsa- bill
Forum Oracle
Karma: 21
Posts: 1779
Re: routing for the oil pipe from the oil tank to the valve covers?
«
Reply #4 on:
24.10. 2011 20:01 »
Hi there, here's a pic of mine, not saying it's right but it's neat enough, needs a bend at the tank union back towards the frame.
DSC01325.JPG
(562.91 KB, 836x1852 - viewed 64 times.)
Logged
All the best - Bill
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Technical
-----------------------------
=> A7 & A10 Engine
=> A7 Long Stroke Engine
=> Clutch, Primary & Gearbox
=> Frame
=> Lucas, Electrical, Ignition
=> Amal & Carburation
-----------------------------
Bikes, Pictures, Stories & more
-----------------------------
=> Bikes, Pictures & Members
=> Wanted & For Sale
=> Ebay Finds
=> Chat, Offtopic & Diverse
=> BSA related Links & Service Literature
=> Best Picture 2010 + 2011: Poll is open for voting
===> Best Picture 2009. The winner is...
-----------------------------
Forum News, Help & Info
-----------------------------
=> Forum Info & Help
Loading...