The BSA A7 & A10 Forum
25.05. 2012 03:12 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Best Picture poll still open for votes
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Shiney Longstroke up for grabs  (Read 633 times)
0 Members and 1 Guest are viewing this topic.
Tomcat
Active
*

Karma: 0
Posts: 25



« on: 03.10. 2011 09:53 »

Is this beauty known to a forum member? I would be interested to know where the owner got the intake hose from.  http://www.ebay.com.au/itm/BSA-A7-500-Twin-Rigid-Frame-/220867817104?pt=AU_Motorcycles&hash=item336cbf6e90   Cheers TC
Logged

'48 A7 '56 A10GF '70 A65T
Howard
Very active
**

Karma: 1
Posts: 64


« Reply #1 on: 05.10. 2011 00:13 »

If you are refering to the rubber tube between the carb and the air filter, the A7 plunger items are available on EBAY UK about £6 or £7 I think these are the same as the rigid frame models.
Logged
terryk
A-Clairvoyant
****

Karma: 0
Posts: 346

Townsville Queensland Australia


« Reply #2 on: 07.10. 2011 12:40 »

No, longstroke aircleaner to carby rubbers are not the same as later A7 Mark2. Also A7 and A10 ones are different as well but you always see them listed on ebay being for A10 and A7.
You can get the longstrokes rubbers in the UK I would need to go through my emails to find the place that makes them.
Logged

1951 A10 plunger, 1958 A10 super rocket, 1948 A7 longstroke,
1951 A7 plunger, 1940s M21, WDM20, 1948 B33, 1949 b31
Tomcat
Active
*

Karma: 0
Posts: 25



« Reply #3 on: 22.10. 2011 06:46 »

Looks like it was passed in below reserve, Classic Style had one for $12k a few months ago. Terryk I would like to know the place that makes the hose, if you could have a look that would be great thanks Cheers Tomcat
Logged

'48 A7 '56 A10GF '70 A65T
terryk
A-Clairvoyant
****

Karma: 0
Posts: 346

Townsville Queensland Australia


« Reply #4 on: 22.10. 2011 15:30 »

Hi Tomcat here is the email of the UK place that makes carby to airfilter rubbers.
He makes all three types.  Mark 1 A7 longstroke, mark 2 A7 and A10 plunger.
He does take a little while to respond but he is reliable and the rubbers were good quality.
cheers Terry

Jeffalanhunter@aol.com
Logged

1951 A10 plunger, 1958 A10 super rocket, 1948 A7 longstroke,
1951 A7 plunger, 1940s M21, WDM20, 1948 B33, 1949 b31
Tomcat
Active
*

Karma: 0
Posts: 25



« Reply #5 on: 27.10. 2011 09:31 »

Thanks for that terryk, I will make an equiry
Logged

'48 A7 '56 A10GF '70 A65T
Gavin
A's best friend
***

Karma: 0
Posts: 106



« Reply #6 on: 27.10. 2011 12:53 »

Hi Mate. I have an A10 and finally found a connector for the carby / air cleaner. Then sent it to Clauss Studios, who have made copies of it. you can get one from them. The A10 and A7 rubbers are distinctly different. The A10 needs to top of the carby entry to be level with the Vokes air cleaner entry top. The A7 is about 1/2 inch lower.

their address is: any further emails send to
 ClaussStudios@aol.com this is our ebay address  thanks again
Logged
Tomcat
Active
*

Karma: 0
Posts: 25



« Reply #7 on: 05.01. 2012 11:30 »

Hi Tomcat here is the email of the UK place that makes carby to airfilter rubbers.
He makes all three types.  Mark 1 A7 longstroke, mark 2 A7 and A10 plunger.
He does take a little while to respond but he is reliable and the rubbers were good quality.
cheers Terry

Jeffalanhunter@aol.com

Thanks terryk for your help in obtaining the un-obtainable smile Cheers TC


* A65 017.jpg (47.83 KB, 480x600 - viewed 9 times.)
Logged

'48 A7 '56 A10GF '70 A65T
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!