stands wanted

[rocket111]

I already know this is a long shot but has anyone got a main stand  and a side stand (complete with framemount) for my super rocket
And yes i know the price etc  
 

[MG]

Hi!
Draganfly list several, dunno what year your bike is, I got a good used centre stand for the A7SS from them, at a very reasonable price. That was some years ago though.

http://www.draganfly.co.uk/shop/pi1098473696.htm?categoryId=681

http://www.draganfly.co.uk/shop/pi1748492407.htm?categoryId=684

[rocket111]

tried draganfly they are going to have some made(but not goin to happen over night) bike is a 61

[a101960]

Side stands and center stands available from these two suppliers:

http://www.suprememotorcycles.co.uk/products.php?CatID=9

http://www.burtonbikebits.net/Stands.htm

John

[rocket111]

thanks john i have e mailed burton ,will try supreme next
spoke to lightning earlier and was told i wont get them even if others are showing stock
burton e mailed me straight back and have both in stock british made
has any one bought oe or the other ,i have read the various threads re quality and stands breaking and whilst they are pricey items if they are good its got to be worth it

[wilko]

Why is there a difference between single and twin stands? (swinging arm)

[a101960]

Wilko, the stands fitted to the singles are entirely different as are the frame mounting lugs thefore they are not interchangeable. The single stand was however fitted to the very early S/A A10's. there were several variations of the A10 stand. The RGS stand for example had no foot extension fitted. The top picture is the single and early A10 stand the picture below shows the later A10 stand.

As far as I am aware the the side stands are all the same.

MG, I bought my center stand from Burton Bike Bits and I was very happy with it.

John

[trevinoz]

Wilko,
            The difference in single vs twin stands is the provision of the foot lever on the twin.
This was thought not necessary on singles as there is no exhaust pipe in the way.
They didn't think about the lever grinding the road in fast left handers, though!

 Trev.

[MG]

They didn't think about the lever grinding the road in fast left handers, though!

oh yes, I built mine up by welding when I rebuilt the bikes, now they are both ground flat again. 
Those Beezas handle well for sure!

[Brian]

If you are riding at night you can push the stand down with your heel and send a nice spray of sparks out the back, looks really impressive.

Or so I am told, I wouldnt do anything like that...............................................

[MG]

centre stand on the bay:

http://www.ebay.co.uk/itm/BSA-A10-centre-stand-/170687849767?pt=UK_Motorcycle_Parts&hash=item27bdc9e527

[Sav]

I bought a centre stand for my A10SR from Draganfly and it fell apart almost immediately and they gave me a refund. The cross member did not tightly fit hole in the legs.

I also bought a welded repaired one off Ebay and it snapped first time, monkey metal.

The Burton Bike Bits one I subsequently bought has been fine.

HTH.

sav