The BSA A7 & A10 Forum
05.02. 2012 05:28 *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: incorrect part book  (Read 417 times)
0 Members and 1 Guest are viewing this topic.
bsa- bill
Forum Oracle
*****

Karma: 19
Posts: 1671



« on: 24.07. 2010 23:11 »

I noticed while I have the timing case covers off that for the second time I have managed to install the bushes for the idler gear the wrong way around.
I did this with my first bike and thought I must have got the bushes mixed up, the mistake became noticeable when the dynamo drive section filled up with oil which began to leak out past the dynamo cork, I have an SRM belt drive in there, testament to the quality of this belt drive that it continued to drive the dynamo even in oil.
Anyway I changed the bushes around after checking with my mates A10 that was in pieces at the time, the outer bush has a scroll that only comes half way through and scrolls the oil away from the dynamo section.
I could not understand how I had done the same thing again until I looked at my spares book, the spares book has the bushes the wrong way around.
There are four bushes the same 67-0686 three for the camshaft and one for the inner idler gear (inner as in the crankcase) the outer bush for the idler gear is 67-0286  and goes in the inner timingside cover,
Hope this prevents someone doing the same
Logged

All the best - Bill
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!