K2F Armature Schematic

[dpaddock]

Does anyone have a wiring schematic of the Lucas K2F magneto armature?

David

[Triton Thrasher]

One end of the LT goes to the armature yoke. The other end goes to the screw that holds the points plate on, with the condenser bridging that connection to the yoke. The yoke is earthed to the engine by the earth brush.

One end of the HT goes to the slip ring. The other to the yoke.

Have I got that right?

[groily]

David, you could look at www.brufnut/de/WORKSHOP/LUCAS/lucas.htm which might help as the pix there show pretty much everything. Some guy! Otherwise, the Lucas service sheets are semi-helpful, especially the one on remagnetising.